Cordless microphone is considered capable of bringing convenience as well as freedom in using it. Despite offering ease of operation, in fact there are still many who do not understand very well how to use it until the best wireless mic is not functioning optimally. Here are some common mistakes that often occur when using a wireless microphone.
Some Common Mistakes When Using Wireless Microphones By : Goshen Swara Indonesia
1. Unobstructed Signals
In use, the wireless microphone can function by utilizing the signal it gets. Uniquely the users of the audio device actually complained that it was almost similar, where the microphone that had just been bought did not get a strong signal. After further investigation, it turned out that the main factor why the audio device was unable to get a strong signal came from obstruction of the signal entering the microphone.
This one error often occurs, where the trigger factor for signal obstruction is due to objects such as metal or room dividers. Besides being caused by objects, it turns out that the presence of humans in large quantities can inhibit the audio device to receive signals. Because the human body is able to reflect or even absorb these signals.
2. Poor Battery Management
The best wireless mic cannot function properly indeed makes the heart beat faster. Before panic attacks more, it never hurts to check the battery first. Why should you check the battery? The reason is a small mistake such as battery usage that is not appropriate or even tends to be excessive, it can also make an audio device unusable.
3. Set Up Bad Frequencies
Setting up a bad frequency is one of the common mistakes that still often occurs. This one error is purely due to the user's own fault, where they set up when close to other objects that have active channels. The solution to this one problem is quite simple and easy to do, where you only need to provide distance from the frequency of other active channels when you want to set up the frequency.
4. Improper Placement
Another common mistake that is still often encountered is the antenna placement error. Of all the cases that occur, complaints such as shorter network coverage or even dead spots in certain areas can occur. Especially for this problem, you only need to place it in the best location so that performance is maintained.
5. Set Up Gain Exceeds Limits
Before using this sophisticated audio device, the user needs to first set the inpit gain as an adjustment step. If you accidentally set the gain too high, distortion will most likely occur. To reduce the worst possibility, you can do a gain control setting. In this way, the best wireless mic can be used again as before.
Sophisticated technology such as a wireless microphone is presented to facilitate every human activity, but not infrequently it also causes confusion when first using it. Actually, these conditions are quite reasonable, but it would be too much when it does not want to know how to use it properly. As a result, the audio device is damaged or can not function optimally.
Read Also :
0コメント